Analysis of primary coil voltage on spark ignition engine using flash cable

Analysis of primary coil voltage on spark ignition engine using flash cable

Authors

  • Ahmad Arif Universitas Negeri Padang
  • Bintang Abimanyu Universitas Negeri Padang
  • Wawan Purwanto Universitas Negeri Padang
  • Dwi Sudarno Putra Universitas Negeri Padang
  • Wagino Wagino Universitas Negeri Padang
  • Milana Milana Universitas Negeri Padang
  • Nuzul Hidayat Universitas Negeri Padang
  • M. Yasep Setiawan Universitas Negeri Padang
  • Hendra Dani Saputra Universitas Negeri Padang

Keywords:

Primary coil voltage, Spark ignition engine, Flash cable

Abstract

The efficiency of the ignition system in a spark ignition engine is very important to improve engine performance. This study aims to analyze the use of flash cable on the primary coil voltage in a spark ignition engine applied to an injection motorcycle. There are three types of flash cables (11, 16, and 21 coils) that are made and tested to see the increase in voltage produced. The experimental method is used with a measuring tool in the form of a peak voltage adapter connected to a digital multimeter. The results of the study showed that variations in the length of the flash cable coil significantly affected the primary coil voltage. Flash cable with 21 coils provided the highest voltage increase of 262 V, compared to without using a flash cable which only reached 219 V. The use of flash cable can improve ignition efficiency and spark ignition engine performance.

References

[1] M. S. Firmansyah, W. Purwanto, H. Maksum, A. Arif, M. Y. Setiawan, and C. A. Gusti, “Analisis Emisi Gas Buang (CO, CO2 dan HC) pada Sepeda Motor FI dengan Variasi Saat Pengapian, Saat Penginjeksian dan Jenis Bahan Bakar,” JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, vol. 1, no. 1, 2023.

[2] W. Purwanto, Y. D. Herlambang, K. M. Paboreal Dunque, F. Mulani, D. S. Putra, and M. Martias, “Enhancements to the Work Ability of a High-Speed Motor Used in Machine Tools,” TEM Journal, pp. 1443–1450, 2023.

[3] A. Arif, N. Hidayat, and M. Y. Setiawan, “Pengaruh Pengaturan Waktu Injeksi dan Durasi Injeksi Terhadap Brake Mean Effective Pressure dan Thermal Efficiency Pada Mesin Diesel Dual Fuel,” INVOTEK, vol. 17, no. 2, pp. 67–74, 2017.

[4] A. Arif, Rifdarmon, Milana, Martias, and N. Hidayat, “Effects of Fuel Type on Performance in Gasoline Engine with Electronic Fuel Injection System,” J. Phys.: Conf. Ser., vol. 1594, no. 1, pp. 012036, 2020.

[5] W. Purwanto, K. I. Yogandi, R. Ari Saputra, C. Ariati, D. S. Putra, and A. Ikhsan, “Exploration of an Electrical Energy Harvesting System Utilizing the Flow of Exhaust Emissions on a Motorcycle,” in 2023 International Conference on Advanced Mechatronics, Intelligent Manufacture and Industrial Automation (ICAMIMIA), pp. 528–532, 2023.

[6] A. A. M. Putra, A. Finali, and N. A. Mufarida, “Pengaruh Penggunaan Variasi Sistem Pengapian Terhadap Performa Motor 4 Tak,” Jurnal Smart Teknologi, vol. 2, no. 1, 2020.

[7] W. Purwanto, D. S. Putra, H. D. Saputra, Z. Abadi, Y. Nursyafti, and T. Sugiarto, “The Invention of a Valve Skirting Device for Automobiles Utilising an Electric Motor with an AC Dimmer Setting,” in 2023 IEEE 7th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE), pp. 1–4, 2023.

[8] M. Ramadhan, D. S. Putra, W. Purwanto, M. Y. Setiawan, and M. Muslikhin, “Implementation of Conventional Motorcycle Conversion into Electric Motorcycle Using BLDC Motor and LiFePO4 Battery,” JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, vol. 6, no. 3, 2024.

[9] W. Wagino et. all., “Eco-Friendly Motorcycle Technology: Examining the Impact of Banana Peel-Based Catalytic Converters on CO Emissions with Biogasoline Fuel,” E3S Web Conf., vol. 500, pp. 03030, 2024,.

[10] Z. Hafizh, A. Deni, and M. A. Riko, “Engine Management System Berbasis Mikrokontroler ATMega 2560,” other, Universitas Muhammadiyah Sumatera Barat, 2024. Accessed 13 November 2024.

[11] M. H. Tullah, Y. M. D. E. Saputra, F. Fachruddin, M. P. Utomo, and F. M. Rahman, “Rancang Bangun Perangkat Perekam Data Konsumsi Bahan Bakar Dan Rasio Udara-Bahan Bakar Digital Untuk Analisa Unjuk Kerja Mesin Bensin Pembakaran Dalam,” Jurnal Mekanik Terapan, vol. 1, no. 2, 2020.

[12] W. Purwanto, F. Afif, R. Lapisa, D. Yuvenda, M. Y. Setiawan, and H. D. Saputra, “Optimasi Penggunaan Jenis Busi, Oli, Dan Campuran Ethanol Bensin Terhadap Peningkatan Suhu Dan Jarak Tempuh Sepeda Motor 4 Langkah Dengan Metode Taguchi,” JTPVI: Jurnal Teknologi dan Pendidikan Vokasi Indonesia, vol. 3, no. 2, 2022.

[13] C. Shetty, et. al., “Analytical Expressions for Inductances of 3-D Air-Core Inductors for Integrated Power Supply,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 10, no. 2, pp. 1363–1383, 2022.

[14] M. Solomentsev and A. J. Hanson, “At What Frequencies Should Air-Core Magnetics Be Used?,” IEEE Transactions on Power Electronics, vol. 38, no. 3, pp. 3546–3558, 2023.

[15] E. Asahina, M. Fukuoka, I. Masuda, A. Nagai, K. Maeda, and M. Ishitobi, “Structure of Air-Core Power Inductor With High Energy Density and Low Copper Loss,” IEEE Transactions on Magnetics, vol. 59, no. 11, pp. 1–5, 2023,.

[16] S. Jha, S. Acharya, and S. Mishra, “Design and Performance Evaluation of an Air-Core Inductor for Point-of-Load (POL) Converter,” in 2020 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 3280–3285, 2020,.

[17] J. Kampkötter, M. Karagounis, and R. Kokozinski, “A high frequency radiation hardened DC/DC-converter with low volume air core inductor,” J. Inst., vol. 19, no. 01, pp. C01052, 2024.

[18] H. Lin, G. Van der Plas, X. Sun, D. Velenis, E. Beyne, and R. Lauwereins, “System Optimization: High-Frequency Buck Converter With 3-D In-Package Air-Core Inductor,” IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 12, no. 3, pp. 401–409, 2022.

[19] M. F. Janitra and A. R. A. Rohman, “Analisis Perbandingan CDI Shindengen dan CDI BRT Dual Band Terhadap Torsi Dan Horse Power Mesin Sepeda Motor Kawasaki KLX 150 Tahun 2014,” Motor Bakar : Jurnal Teknik Mesin, vol. 8, no. 3, 2024.

[20] S. Hartanto and Handoko, Materi Ajar Praktek Tune Up Sepeda Motor 4 Tak Berbasis Kebutuhan Dunia Kerja untuk Siswa SMK. Penerbit CV. SARNU UNTUNG.

[21] Wiranto, Nehru, and Y. R. Hais, “Rancang Bangun Sistem Monitoring Dan Kontrol PLTS Berbasis Web Fakultas Sains Dan Teknologi Universitas Jambi,” SEMASTER: Seminar Nasional Teknologi Informasi & Ilmu Komputer, vol. 2, no. 1, pp. 73–87, 2023..

[22] H. Maksum and W. Purwanto, “The Development of Electronic Teaching Module for Implementation of Project-Based Learning during the Pandemic,” International Journal of Education in Mathematics, Science and Technology, vol. 10, no. 2, 2022.

[23] B. Wilantara, et. all., “Uji Modifikasi Komponen dan Sistem Pengapian Yamaha 5D9 Terhadap Emisi Gas Buang dan Konsumsi Bahan Bakar,” AEEJ, vol. 2, no. 1, pp. 53–60, 2021.

[24] T. Winarno, D. C. Riawan, and H. Suryoatmojo, “Studi Komparasi dan Analisis Kumparan pada Wireless Power Transfer dengan Mempertimbangkan Variasi Jarak dan Misalignment,” Seminar Nasional Teknik Elektro, 2023, accessed 13 November 2024.

[25] A. Syakur, O. R. Nugraha, F. D. P. Riyanto, and R. D. A. Putra, “Desain Generator Tegangan Tinggi Impuls 31,4 kV menggunakan Ignition Coil,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 11, no. 2, 2023.

[26] A. Arif, et. al., “Analysis of Gasoline Engine Exhaust Emissions Using a Hydrocarbon Crack System,” E3S Web of Conferences, vol. 500, no. 03029, 2024.

[27] S. Mulyanto and M. E. P. Widagda, “Pengaruh Tegangan dan Beban Daya Listrik terhadap Arus dan Putaran Mesin pada Gentset Berbahan Bakar LPG,” DJITM, vol. 11, no. 1, pp. 40, 2019.

[28] A. Mulyadi and C. Huda, “Magneto: Desain dan Simulasi,” Angkasa: Jurnal Ilmiah Bidang Teknologi, vol. 16, no. 1, 2024,.

[29] K. N. Faizin, “Pengaruh Variasi Diameter Pulley Alternator dan Daya Motor Terhadap Arus dan Kecepatan Proses Pengisian Baterai 12 Volt,” Journal of Electrical Electronic Control and Automotive Engineering (JEECAE), vol. 1, no. 1, 2016.

[30] S. Różowicz, A. Zawadzki, M. Włodarczyk, and A. Różowicz, “Modeling of Internal Combustion Engine Ignition Systems with a Circuit Containing Fractional-Order Elements,” Energies, vol. 15, no. 1, 2022.

[31] M. Nuryasin and A. Suprihadi, “Optimalisasi Sistem Pengapian CDI (Capasitor Discharge Ignition) Pada Motor Honda CB 100cc,” Nozzle : Journal Mechanical Engineering, vol. 3, no. 1, 2014.

[32] I. Suriaman, R. A. Nurikhsan, N. Yusuf, T. B. U. A. Subekhi, and C. Anwar, “Analisis Pengaruh Sistem Pengapian CDI Standar Dan Modifikasi Pada Motor Vario 110 CC,” Jurnal Mekanik Terapan, vol. 4, no. 1, 2023.

Downloads

Published

2025-05-31

How to Cite

Analysis of primary coil voltage on spark ignition engine using flash cable. (2025). BIS Energy and Engineering, 2, V225045. https://doi.org/10.31603/biseeng.370

Most read articles by the same author(s)

Similar Articles

1-10 of 31

You may also start an advanced similarity search for this article.