Effect of ignition timing variations using a programmable ECU on power and torque of FI motorcycle
Keywords:
Power, Torque, Ignition timing, Programmable ECUAbstract
This study examines the effect of changes in ignition timing on the power and torque of a 4 stroke engine, the object of research is a Honda Beat FI vehicle in 2015 with a BRT programmed ECU. The purpose of this study is to determine the impact of changes in ignition timing on the power and torque produced. The method used is experimental research, namely data collection through testing using Dynotest tools before and after changes in ignition timing to do.The results showed that the change in ignition timing advanced 2° resulted in the greatest increase in power from 5.56 kW to 5.58 kW (0.75% increase compared to standard conditions). While the change in the delayed ignition timing by 2° resulted in the greatest increase in torque from 8.21 N-m to 8.28 N-m (0.97% increase over the standard test).
References
[1] M. Nasir, L. Syaifullah, R. Rifdarmon, and N. Hidayat, “Analysis of Citronella Oil Additive Mixing on Engine Performance on 4-Stroke Motorcycles,” MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, vol. 5, no. 1, pp. 127–138, Jan. 2023, doi: 10.46574/motivection.v5i1.202.
[2] K. V. Kumar, R. Reddy, K. G. Babu, Y. Pragathi, R. V. S. Lakshmi, and P. R. Kumar, “An Effect of Iridium Spark Plugs on SI Engine Performance and Exhaust Emissions by using Plastic Oil Petrol Blends,” International Journal of Automotive and Mechanical Engineering, vol. 19, no. 1, pp. 9412–9418, 2022, doi: 10.15282/ijame.19.1.2022.05.0724.
[3] A. D. Soewono, M. Darmawan, and J. Halim, “KAJIAN EKSPERIMENTAL PENGARUH PENGGUNAAN ELECTRONIC CONTROL UNIT AFTERMARKET PADA DAYA, TORSI, EMISI DAN KONSUMSI BAHAN BAKAR SEPEDA MOTOR 150CC,” Jurnal Rekayasa Mesin, vol. 14, no. 2, pp. 487–497, Aug. 2023, doi: 10.21776/jrm.v14i2.1276.
[4] R. Handriyanto, “Analisa re-mapping ECU terhadap performa dan emisi gas buang pada motor injeksi Scoopy 110,” Sultra Journal of Mechanical Engineering (SJME), vol. 3, no. 2, pp. 58–70, 2024.
[5] T. M. Khadri, T. W. Saputra, and D. S. Wijayanto, “THE INFLUENCE OF IGNITION TIMING AND INJECTION DURATION USING ARDUINO-BASED ECU ON THE PERFORMANCE OF A 110CC FI ENGINE,” Scientific Journal of Mechanical Engineering, vol. 9, no. 2, pp. 117–128, 2024, doi: 10.20527/sjmekinematika.v9i2.317.
[6] N. Saidatin et al., “Analisa Eksperimental Pengaruh Ignition Timing dan Injektor Timing Terhadap Performansi Serta Emisi Gas Buang pada Mesin Sepeda Motor,” 2024.
[7] M. Setiyo and L. Utoro, “RE-MAPPING ENGINE CONTROL UNIT (ECU) UNTUK MENAIKKAN UNJUK KERJA MESIN SEPEDA MOTOR,” Jurnal Mesin Teknologi (SINTEK Jurnal, vol. 11, no. 2, 2017.
[8] F. Maulana, J. Suwignyo, and F. Fatra, “VARIASI ECU DAN THROTTLE BODY TERHADAP PERFORMA (TORSI DAN DAYA) MESIN SEPEDA MOTOR HONDA VARIO 150 DENGAN SISTEM PROGRAMMED FUEL INJECTION,” no. 1, p. 2023, Oct. 2023.
[9] T. M. Khadri, T. W. Saputra, and D. S. Wijayanto, “THE INFLUENCE OF IGNITION TIMING AND INJECTION DURATION USING ARDUINO-BASED ECU ON THE PERFORMANCE OF A 110CC FI ENGINE,” vol. 9, no. 2, pp. 117–128, 2024, doi: 10.20527/sjmekinematika.v9i2.317.
[10] M. Rahmaddaani, E. Edi Poerwanto, and W. Irdianto Jurusan Teknik Mesin, “PENGARUH VARIASI IGNITION TIMING MENGGUNAKAN ECU PROGRAMMABLE TERHADAP PERFORMA MESIN PADA SEPEDA MOTOR 150CC SOHC BERPENDINGIN AIR,” vol. 4, no. 2, pp. 27–32, 2020.
[11] A. Adriyanto Da Costa Amaral, N. Saidatin, R. Mahmud, dan Iis Rohmawati, and I. Teknologi Adhi Tama Surabaya, “Pengaruh ECU (Electronic Control Unit) dan Variasi tipe Jumlah Hole Injector Terhadap Performa Engine Single Cylinder 4 Langkah,” 2022.
[12] D. Arbiantara and E. Widodo, “Analysis of the Effect of Bore Up Variation on Engine Performance,” Rekayasa Energi Manufaktur) Jurnal |, vol. 8, no. 2, pp. 2528–3723, 2023, doi: 10.21070/rem.v8i2.1641.
[13] S. R. Ariyanto, Suprayitno, and R. Wulandari, “Design of Metallic Catalytic Converter using Pareto Optimization to Improve Engine Performance and Exhaust Emissions,” Jan. 01, 2023, Universitas Muhammadiyah Magelang. doi: 10.31603/ae.7977.
[14] M. Gad and N. M. Ghazaly, “Evaluation of Parameters Affecting the Performance of the Spark Ignition Engine,” SVU-International Journal of Engineering Sciences and Applications, vol. 4, no. 2, pp. 216–224, Dec. 2023, doi: 10.21608/svusrc.2023.197849.1113.
[15] J. PendidikanTambusai, N. Jalinus, I. Nanda, and J. Rizal Firdaus, “The Effect of Changes in Ignition Timing on Power, Torque and Fuel Consumption on the Honda Supra X 125CC,” 2021.
[16] J. Zareei and A. H. Kakaee, “Study and the effects of ignition timing on gasoline engine performance and emissions,” European Transport Research Review, vol. 5, no. 2, pp. 109–116, Jun. 2013, doi: 10.1007/s12544-013-0099-8.
[17] T. M. Khadri, T. W. Saputra, and D. S. Wijayanto, “THE INFLUENCE OF IGNITION TIMING AND INJECTION DURATION USING ARDUINO-BASED ECU ON THE PERFORMANCE OF A 110CC FI ENGINE,” vol. 9, no. 2, pp. 117–128, 2024, doi: 10.20527/sjmekinematika.v9i2.317.
[18] B. C. Purnomo and N. Widodo, “Torque and power characteristics of single piston lpg-fueled engines on variations of ignition timing,” Automotive Experiences, vol. 2, no. 1, pp. 22–27, 2019, doi: 10.31603/ae.v2i1.2632.
[19] D. R. B. Syaka, A. T. Purwoko, and Sopiyan, “Design and Experiment of a Prototype Electronic Control Unit Direct Injection Fuel System Arduino-Based for 2-stroke Spark Ignition Engine,” Automotive Experiences, vol. 5, no. 1, pp. 49–56, Jan. 2022, doi: 10.31603/ae.5472.
[20] M. Aulia Afwan and W. Dwi Rahardjo, “PENGARUH PENGGUNAAN ECU STANDAR DAN ECU JUKEN DENGAN VARIASI INJEKTOR TERHADAP TORSI DAN DAYA SEPEDA MOTOR YAMAHA V-IXION,” 2020. [Online]. Available: http://journal.unnes.ac.id/sju/index.php/asej
Downloads
Published
Conference Proceedings Volume
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.