Vol. 3 (2026): The 7th BIS-STE 2025 in conjunction with The 3rd INTERCONNECTS 2025

Published: 2026-05-04

  • Multi-response optimization of biogasoline engine performance and exhaust emissions using the taguchi method

    Riko Saputra, Wawan Purwanto, Dwi Sudarno Putra, Andril Arafat, Wilia Sondriva (Author)
    V326001
    DOI: https://doi.org/10.31603/biseeng.505

  • Assessment green building in the learning center building using the greenship existing building tool

    Lia Indriani, Ahmad Zaki, Nursetiawan, Guntur Nugroho (Author)
    V326002
    DOI: https://doi.org/10.31603/biseeng.510

  • Landslide hazard spatial distribution for disaster mitigation in tutur sub-district

    Titi Rahayuningsih, Nurul Fitri Alya, Vita Ayu Kusuma Dewi, Mega Septia Sarda Dewi, Eko Suwarno, Antelas Eka Winahyo (Author)
    V326003
    DOI: https://doi.org/10.31603/biseeng.515

  • Utilization of ironwood sawdust waste as an adsorbent through chemical and physical activation processes with various KOH activation concentrations

    Wahyudi Wahyudi, Mustafa Mustafa, Kusyanto Kusyanto, Andri Kurniawan, Lasriyah Manurung, Gita Puspita Sari (Author)
    V326004
    DOI: https://doi.org/10.31603/biseeng.595

  • Effect of resin and catalyst addition on the characteristics of asphalt concrete wearing course (AC-WC) for coastal area

    Juny Andry Sulistyo, Qurrota A’yun, Rik Van Marum (Author)
    V326005
    DOI: https://doi.org/10.31603/biseeng.596

  • Effect of variation in size of coarse aggregate on compressive strength, porosity, and permeability in pervious concrete

    Yudi Pranoto, Daru Purbaningtyas, Mohammad Hidayat, Andini Tri Ambar Wati (Author)
    V326006
    DOI: https://doi.org/10.31603/biseeng.657

  • Digital-based construction project supply chain optimization model for cost and time efficiency in Karawang Regency

    Bahar Amal, Fajar Ramadhan, Dicki Dian Purnama, Cahya Suryadi, Nurani Masyita, Grisela Nurinda Abdi, Fatma Nurkhaerani, Neneng Winarsih, Amalia Rizka Sugiarto (Author)
    V326007
    DOI: https://doi.org/10.31603/biseeng.602

  • Experimental study of the effect of HHO (oxyhydrogen) electrolyzer installation location on fuel mass flow rate in a four-stroke gasoline motorcycle engine

    Hasan Maksum, Muhammad Sadly Firmansyah, Ridho Wahyudi, Jeri Rizki Efendi, Dwi Sudarno Putra, Wawan Purwanto (Author)
    V326008
    DOI: https://doi.org/10.31603/biseeng.604

  • Comparative analysis of electrical energy consumption in sustainable turning of suspension spring equalizer components using a line boring machine

    Arfan Halim, Ilmawan Suryapradana, Akbar Pratama, Masnur Masnur (Author)
    V326009
    DOI: https://doi.org/10.31603/biseeng.520

  • Traffic survey analysis for enhancing road safety: An empirical and literature-based review

    Bambang Istiyanto, Pratikso Pratikso, Racma Mudiyono (Author)
    V326010
    DOI: https://doi.org/10.31603/biseeng.526

  • Influence of rotor magnet geometry variation on performance characteristics of a fuel-injected four-stroke motorcycle engine using high-ethanol fuel blends

    Wawan Purwanto, Dwi Sudarno Putra, Ahmad Arif, Ihsan Nasution, Riko Saputra, Samsul Arifin (Author)
    V326011
    DOI: https://doi.org/10.31603/biseeng.530

  • Influence of integrating hydrogen-based electrolyzer on fuel consumption and exhaust emissions in a modified fuel injection four-stroke motorcycle

    Wawan Purwanto, Muhammad Yasep Setiawan, Budi Utomo Wisesa, Andrizal Andrizal, Riko Saputra, Ridho Wahyudi (Author)
    V326012
    DOI: https://doi.org/10.31603/biseeng.538

  • Systematic optimization of ignition timing and spark plug heat range using the taguchi method for cleaner combustion in a four-stroke SI motorcycle engine

    Wawan Purwanto, Martias Martias, Toto Sugiarto, Ilham Febriansyah, Riko Saputra, Ilham Putra Chaniago (Author)
    V326013
    DOI: https://doi.org/10.31603/biseeng.539

  • Design and implementation of an electronic fuel injection retrofit system for a four-stroke motorcycle engine

    Wawan Purwanto, Martias Martias, Hasan Maksum, Milana Milana, Riko Saputra, Wahyu Danang Veby Yansyah (Author)
    V326014
    DOI: https://doi.org/10.31603/biseeng.541

  • Vehicle cabin heat build-up analysis based on dimensional differences under direct sunlight parking

    Wawan Purwanto, Nuzul hidayat, Wagino Wagino, Ardian Kurniawan, Riko Saputra, Gustia Ramadhani (Author)
    V326015
    DOI: https://doi.org/10.31603/biseeng.551

  • Rans-based turbulence modeling of taylor–couette flow: Simulation of vortex formation using the geko model

    Murodil Erkinjon Madaliev, Abdirasul Xolmurzayev Islomjon Tohirov, Mukhlisa Rustamova (Author)
    V326016
    DOI: https://doi.org/10.31603/biseeng.658

  • Integrating RTC based scheduling and IoT override for organic fertilizer mixing: design, validation, and improvement roadmap

    Rido Putra, Aisyah Fadhilah Arif, Zulwisli Zulwisli, Muslim Muslim, Iffarial Nanda, Nuzul Hidayat, Zummi Tridinanti Azry (Author)
    V326017
    DOI: https://doi.org/10.31603/biseeng.553

  • Air intake system optimization through velocity stack and turbo cyclone variations for fuel efficiency improvement and exhaust emission reduction in 125cc automatic motorcycles

    Rahmat Aldi, Wagino Wagino, Toto Sugiarto, Ahmad Arif, Martias Martias, Muhammad Yasep Setiawan, Rahmat Desman Koto (Author)
    V326018
    DOI: https://doi.org/10.31603/biseeng.557

  • Multi-method accident blackspot analysis using ean, ucl and chain of event: Evidence from Indonesian urban roads

    Suprapto Hadi, Slamet Imam Wahyudi, Kartono Wubowo, Brasie Pradana Sela Bunga Riska Ayu, Reza Fitrama Nur Cahyono (Author)
    V326019
    DOI: https://doi.org/10.31603/biseeng.559

  • Hydraulic and numerical analysis of non-uniform and two-phase wastewater flow in sewer pipelines

    Shakhzodbek Umurkulov, Jahongir Orzimatov, Ismoil Nasirov, Durdona Davronova, Islomjon Inomjonov (Author)
    V326020
    DOI: https://doi.org/10.31603/biseeng.560

  • Integrated supply chain management performance evaluation model in the manufacturing industry of PT XYZ

    Ratna Sari Dewi, Moehamad Aman, Eko Muhammad Widodo, Affan Rifa`i, Tuessi Ari Purnomo (Author)
    V326021
    DOI: https://doi.org/10.31603/biseeng.562

  • Intelligent vehicle control via AI-MIMO: Architectural design and simulation-based evaluation

    Suci Suci, Dwi Sudarno Putra, Risfendra Risfendra, Iffarial Nanda, Meri Azmi (Author)
    V326022
    DOI: https://doi.org/10.31603/biseeng.561

  • Systematic literature review: Impacts of vibration-assisted welding and step aging on corrosion and fatigue in AA5083–AA6061 joints

    Saifudin Saifudin, Ilham Habibi (Author)
    V326023
    DOI: https://doi.org/10.31603/biseeng.656

  • Developing Uzbekistan’s economy through the principles of industry 4.0

    Abdumajidxon Muxtorov, Arziyev Shovkatjon Soliyevich (Author)
    V326024
    DOI: https://doi.org/10.31603/biseeng.655

  • Impact of coal density on heavy equipment efficiency in mining operations: A case study of silicified and low rank coal

    Rahma Norfaeda, Dessy Lestari Saptarini, Theresia Oktaviani (Author)
    V326025
    DOI: https://doi.org/10.31603/biseeng.563

  • Implementation of lighting systems in academic building to achieve green campus

    Ayu Herzanita, Amirah Fairuz Insyirah (Author)
    V326026
    DOI: https://doi.org/10.31603/biseeng.605

  • Causal loop analysis for smart production precast: balancing productivity and sustainability with digital technologies

    Amalia Rizka Sugiarto, Yusuf Latief, Dodi Sudiana (Author)
    V326027
    DOI: https://doi.org/10.31603/biseeng.564

  • Geotechnical study of mudcell as a management strategy for slurry overburden material at mine sites

    Kartini Kartini, Dimas Raditya Pratama, Rinova Firman Cahyani, Muhammad Rizhan, Ahmad Rizani, Muhammad Arsyad (Author)
    V326028
    DOI: https://doi.org/10.31603/biseeng.565

  • Design of a scaffolding-assisted harvesting tool for palm fresh fruit bunch transport vehicles

    Dhidik Mahandika, Dede Lia Zariatin, Agri Suwandi, Saiful Anwar, Anang Al Faraqh, Iqbal Ramadona, Adnan Fathur Rizki (Author)
    V326029
    DOI: https://doi.org/10.31603/biseeng.566

  • Implementation of human–computer interaction (HCI) in flash flood prediction system using machine learning algorithm

    Baenil Huda, April Lia Hananto, Ahmad Fauzi, Tukino Tukino, Ihsan Nasihin (Author)
    V326030
    DOI: https://doi.org/10.31603/biseeng.572

  • Integrating life cycle assessment with lean assessment matrix: A framework for sustainable automotive manufacturing evaluation

    Nadia Fasa, Dene Herwanto, Apid Hapid Maksum, Sophia Fadhila Albany Tanjung, Haniyyah Azhar (Author)
    V326031
    DOI: https://doi.org/10.31603/biseeng.573

  • Durability analysis of four-stroke motorcycle engines using juken BRT ECU and iridium spark plugs with bioethanol fuel

    Wawan Purwanto, Rido Putera, Arya Adhi Pratama, Budi Utomo Wisesa, Ilham Febriansyah (Author)
    V326032
    DOI: https://doi.org/10.31603/biseeng.575

  • Development of a digital green kanban system for the finished goods warehouse in the snack food industry

    Fransisca Debora, Lifia Citra Ramadhanti, Winarno Winarno, Jauhari Arifin, Jeni Marlina, Naufal Rabbani Sumitra, Febie Elfaladonna, P Yudi Dwi Arliyanto (Author)
    V326033
    DOI: https://doi.org/10.31603/biseeng.585

  • Integration of ergonomic and aesthetic factors in handbag product development

    Dwi Cahyadi, Ratna Wulaningrum (Author)
    V326034
    DOI: https://doi.org/10.31603/biseeng.587

  • Integration of lean-green manufacturing and simulation modeling for sustainable production efficiency improvement

    Wahyudin Wahyudin, Asep Erik Nugraha, Sutrisno Sutrisno, Fahriza Nurul Azizah, Billy Nugraha, Soma Satria (Author)
    V326035
    DOI: https://doi.org/10.31603/biseeng.588

  • Performance and emission characteristics of a direct injection diesel engine fueled with palm oil-based biodiesel blends

    Kuntang Winangun, Trio Egi Pratama, Yoyok Winardi, Fadelan Fadelan, Wawan Trisnadi Putra (Author)
    V326036
    DOI: https://doi.org/10.31603/biseeng.589

  • Optimization of construction project implementation time using critical path method (CPM) case study of national brain center hospital construction project

    Risma Fitriani, Aira Nazua Artamevia, Ade Momon Subagyo, Sukanta Sukanta, Rianita Puspa Sari (Author)
    V326037
    DOI: https://doi.org/10.31603/biseeng.590

  • Experimental study of the effect of oxyhydrogen (HHO) electrolyzer installation location on exhaust emissions (CO and HC) in a four-stroke gasoline motorcycle engine

    Hasan Maksum, Martias Martias, Wawan Purwanto, M Sadly Firmansyah, Ridho Wahyudi, M Reza (Author)
    V326038
    DOI: https://doi.org/10.31603/biseeng.591

  • Designing a hybrid activated carbon–kaolin catalyst for enhanced liquid fuel production from mixed plastic waste pyrolysis

    Teguh Suprianto, Abdul Rajab, Darmansyah Darmansyah, Dessy Lestari Saptarini (Author)
    V326039
    DOI: https://doi.org/10.31603/biseeng.592

  • Vehicle frame analysis and optimization using finite element analysis approach to improve rigidity and lightness

    Syalsa Billa Ahmad, M. Yasep Setiawan, Wawan Purwanto, Ahmad Arif, Milana Milana, Inna Kholidasari, Dori Yuvenda, Reza Andila (Author)
    V326040
    DOI: https://doi.org/10.31603/biseeng.593

  • Ecosystem based adaptation for coastal resilience: Lessons from managing Tidal flooding in North Java

    Vita Ayu Kusuma Dewi, Titi Rahayuningsih, Budiman Minasny, Muhammad Aris Ichwanto, Syafiqa Raudatur Nadya (Author)
    V326041
    DOI: https://doi.org/10.31603/biseeng.594