Pyrolysis of plastic fishing gear waste for liquid fuel production: Characterization and engine performance analysis
Keywords:
Pyrolysis, fishing gear, plastic wasteAbstract
Plastic waste originating from fishing gear, composed of both polyethylene (PE) and polyamide (PA) materials, constitutes a pressing environmental concern. Addressing this issue, pyrolysis emerges as a transformative avenue, converting plastic waste into liquid fuel that can serve as an alternative energy resource. This research ventures into a comprehensive investigation of the physical properties intrinsic to plastic oil, encompassing pivotal attributes such as viscosity, density, cetane number, and calorific value. By delving into these properties, the study aims to shed light on the potential of plastic oil as a viable energy source and to understand its applicability within the realm of sustainable fuel alternatives. However, this study's scope extends beyond the elucidation of physicochemical intricacies. Beyond characterizing plastic oil, the research embarks on a holistic exploration encompassing engine performance when employing plastic oil in synergy with a 10% plastic oil and 90% biodiesel blend. This synthesis of fuel types becomes a pivotal aspect of the study's inquisition, culminating in the assessment of engine torque, power output, and Specific Fuel Consumption (SFC). The outcome of these engine tests unveils intriguing insights—peak torque emerged with a 10% PE plastic oil blend, registering at 18 NW, while the highest power output occurred with PE plastic oil, reaching 3.9 kW. Moreover, the dynamic interplay between plastic oil blends and engine efficiency is highlighted, as evidenced by the highest SFC value obtained with a 10% PA plastic oil blend, measuring 12.298 g/Kw.min. The ramifications of this study reverberate far beyond the confines of the laboratory, resonating with the dire need for sustainable energy solutions. By decoding the complex matrix of plastic oil properties and evaluating their seamless integration into combustion processes, this research contributes to the evolving narrative of sustainable energy utilization. As we grapple with the ramifications of plastic waste, this study offers a nuanced perspective that transcends mere material reclamation, propelling us towards an energy landscape that bridges ecological responsibility and pragmatic resource optimization.
References
Adelodun, A. A. (2021). Plastic Recovery and Utilization: From Ocean Pollution to Green Economy. Frontiers in Environmental Science, 9(July), 1–12. https://doi.org/10.3389/fenvs.2021.683403
[2] Chandran, M., Tamilkolundu, S., & Murugesan, C. (2020). Conversion of plastic waste to fuel. In Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions. https://doi.org/10.1016/B978-0-12-817880-5.00014-1
[3] D, A., K., S., V., S., & Y., H. (2021). Pyrolysis characteristics of discarded fishing net collected from Gulf of Thailand using Py-GCMS. Chulalongkorn University, 2018, 2019.
[4] Gebre, S. H., Sendeku, M. G., & Bahri, M. (2021). Recent Trends in the Pyrolysis of Non-Degradable Waste Plastics. Chemistry Open, 10(12), 1202–1226. https://doi.org/10.1002/open.202100184
[5] Ministry of Environment and Forestry. (2020). National Plastic Waste Reduction Strategic Actions for Indonesia. Ministry of Environment and Forestry, Republic of Indonesia, 1–46. https://wedocs.unep.org/bitstream/handle/20.500.11822/32898/NPWRSI.pdf
[6] Nalluri, P., Premkumar, P., & Ch Sastry, M. R. (2023). Experimental study on a computerised VCR diesel engine running on oil made by pyrolyzing waste plastic using Red mud as a catalyst. Green Analytical Chemistry, 5. https://doi.org/10.1016/j.greeac.2023.100054
[7] OECD. (2020). INDONESIA: Indonesia Aims to Reduce Marine Plastic Litter by 70% Relative to Business as usual by 2025. Marine plastics pollution, 2019, 1–4. http://dx.doi.org/10.2760/062975.
[8] Pakiya Pradeep, A., & Gowthaman, S. (2022). Combustion and emission characteristics of diesel engine fuelled with waste plastic oil–a review. International Journal of Ambient Energy, 43(1), 1269–1287. https://doi.org/10.1080/01430750.2019.1684994
[9] Rajesh, S. P., Stanly Jones Retnam, B., Edwin Raja Dhas, J., Haiter Lenin, A., & Manjunathan, A. (2022). Specific Fuel Consumption and Exhaust Emission Test on Single Cylinder Four-Stroke Diesel Engine using Polyethylene Extract Biodiesel as Fuel. International Journal of Vehicle Structures and Systems, 14(3), 339 – 341. https://doi.org/10.4273/ijvss.14.3.11
[10] Ramdhani, I. (2022). Indonesia has a Serious Garbage Problem | Maritime Fairtrade. https://maritimefairtrade.org/indonesia-serious-garbage-problem/
[11] Shahab, N. (2021). Indonesia is Facing a Plastic Waste Emergency. https://www.newsecuritybeat.org/2021/06/indonesia-facing-plastic-waste-emergency/
[12] Sharma, V., Kalam Hossain, A., Griffiths, G., Duraisamy, G., Krishnasamy, A., Ravikrishnan, V., & Ricardo Sodré, J. (2022). Plastic waste to liquid fuel: A review of technologies, applications, and challenges. Sustainable Energy Technologies and Assessments, 53, 102651. https://doi.org/https://doi.org/10.1016/j.seta.2022.102651
[13] Wang, S., Kim, H., Lee, D., Lee, Y.-R., Won, Y., Hwang, B. W., Nam, H., Ryu, H.-J., & Lee, K.-H. (2021). Drop-in fuel production with plastic waste pyrolysis oil over catalytic separation. Fuel, 305, 121440. https://doi.org/https://doi.org/10.1016/j.fuel.2021.121440
[14] Yusuf, A. A., Ampah, J. D., Veza, I., Atabani, A. E., Hoang, A. T., Nippae, A., Powoe, M. T., Afrane, S., Yusuf, D. A., & Yahuza, I. (2023). Investigating the influence of plastic waste oils and acetone blends on diesel engine combustion, pollutants, morphological and size particles: Dehalogenation and catalytic pyrolysis of plastic waste. Energy Conversion and Management, 291. https://doi.org/10.1016/j.enconman.2023.117312
Downloads
Published
Conference Proceedings Volume
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.