PLC program design using state diagram method on insert nut installing machine
Keywords:
PLC, Insert nut installer module, State diagram method, Ladder diagram, AutomationAbstract
A method that can solve the solution of creating a program on a sequential machine includes the state diagram method. To solve the solution of sequential machine automation, it is not enough to use a flow chart as a problem-solving method. The application is in the form of an insert nut installation machine for connecting or joining learning sheet plates with PLC controllers, which is the object of research in this paper. The programming language used is Ladder Diagram (LAD). The state diagram method is applied as an alternative to the Ladder Diagram program design and compared with conventional algorithms such as flow charts. The final result is the design and implementation of the Ladder Diagram PLC program on the Insert Nut Installing Machine. As a result of using the state diagram method, programming becomes faster, more efficient and safer.
References
[1] W. Bolton, Programmable Logic Controllers. Elsevier Science PP - Cambridge, 2015.
[2] G. Schmidt, “Advanced Methods of State Machine Programming in Ladder Logic,” 2020.
[3] K. C. K, Muhammed, S. Sahna, G. M. S, and S. U. Abdulla, “Automatic Color Sorting Machine Using TCS230 Color Sensor And PIC Microcontroller,” International journal of research and innovations in science and technology, vol. 2, no. 2, pp. 33–38, 2015.
[4] M. I. Sari, R. Handayani, S. Siregar, and B. Isnu, “Pemilah Benda Berdasarkan Warna Menggunakan Sensor Warna TCS3200,” TELKA - Telekomunikasi, Elektronika, Komputasi dan Kontrol, vol. 4, no. 2, pp. 85–90, 2018, doi: 10.15575/telka.v4n2.85-90.
[5] M. M. Yusuf, M. Mardiono, and S. W. Lestari, “Rancang Bangun Alat Pemilah Barang Berdasarkan Warna Dan Berat,” J Teknol, vol. 6, no. 2, pp. 119–135, 2019, doi: 10.31479/jtek.v6i2.30.
[6] Fahmizal, “Simulasi Penyortiran Barang Rusak dengan Metode State Diagram menggunakan FX-Trainer – Menara Ilmu Otomasi SV UGM,” 2020.
[7] E. Iskandar, M. Rameli, and N. Nicco, “Ladder Diagram based on State Diagram for Selection and Assembling Part on Dual Conveyor,” JAREE (Journal on Advanced Research in Electrical Engineering), vol. 1, no. 2, 2017, doi: 10.12962/j25796216.v1.i2.19.
[8] R. D. Puriyanto, S. A. Akbar, and A. Aktawan, “Desain Sistem Biodiesel Berbasis Plc Berdasarkan Diagram Keadaan,” Jurnal Ilmiah Teknik Elektro Komputer dan Informatika, vol. 4, no. 2, p. 1, 2019, doi: 10.26555/jiteki.v4i2.12051.
[9] E. Rakhman, D. N. Bagenda, and N. C. Basjaruddin, “Perancangan simulator lift 3 lantai menggunakan diagram keadaan,” JITEL (Jurnal Ilmiah Telekomunikasi Elektronika dan Listrik Tenaga), vol. 4, no. 1, pp. 73–82, 2024, doi: 10.35313/jitel.v4.i1.2024.73-82.
[10] K. H. John, M. Tiegelkamp, and S. (Online Service, IEC 61131-3: Programming Industrial Automation Systems : Concepts and Programming Languages, Requirements for Programming Systems, Decision-Making Aids. Springer Berlin Heidelberg PP - Berlin, Heidelberg, 2010.
[11] F. D. Petruzella, Programmable Logic Controllers. McGraw-Hill Science, Engineering & Mathematics, 1996.
[12] I. Setiawan, Programmable Logic Controller (PLC) dan Teknik Perancangan Sistem . Andi PP - Yogyakarta, 2006.
[13] K. J. Astrom, “Computer Control of a Paper Machine—an Application of Linear Stochastic Control Theory,” IBM J Res Dev, vol. 11, no. 4, pp. 389–405, 1967, doi: 10.1147/rd.114.0389.
Downloads
Published
Conference Proceedings Volume
Section
License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.