Analysis of the use of needle thrust bearings in CVT springs on torque and power on motorcycles
Keywords:
Needle thrust bearings, CVT springs, MotorcyclesAbstract
Several studies have been conducted on methods to enhance the torque and power output of automatic motorcycles. An intriguing addition to the Continuously Variable Transmission (CVT) spring is the incorporation of a needle thrust bearing. Further investigation is required to examine the effects of employing needle thrust bearings on CVT springs on the torque and power of automatic motorcycles. The research seeks to quantify the effect of incorporating Needle Thrust Bearings into motorcycle CVT springs on the generated torque and power. A study was conducted to determine if the inclusion of the needle thrust bearing component has a substantial impact on the motorcycle's torque and power. Experiments were conducted using a Super Dyno 50L, a Dyno testing instrument manufactured by the brand Dyno. The test was conducted thrice, with careful consideration given to the engine's rotational speed (rpm) as a benchmark. The test results indicate that the utilization of Needle Thrust Bearings on CVT springs leads to an average torque increase of 5.32% and an average power increase of 5.84% compared to without the use of Needle Thrust Bearings on CVT springs.
References
[1] Badan Pusat Statistik Indonesia, Statistical Year Book of Indonesia 2022, vol. 1101001. 2022.
[2] F. Ghina, R. A. Anugrah, D. N. Febrianto, M. Munandar, and P. Rosyani, “Sistem. Pendukung. Keputusan. Pemilihan. Unit Kendaraan Bermotor Dengan Metode Simple. Additve. Weighting (SAW),” OKTAL: Jurnal Ilmu Komputer dan Sains, vol. 1, no. 12, pp. 2333–2345, 2022.
[3] G. Joel, J. D. Massie, and J. L. Sepang, “Pengaruh Motivasi, Persepsi Harga, dan Kualitas Produk Terhadap Minat Beli Konsumen Sepeda Motor Matic Merek Yamaha Mio di Kota Manado,” Jurnal EMBA, vol. 2, no. 3, pp. 1463–1472, 1463.
[4] I. KHAERINA, “Konsumen Terhadap Keputusan Pembelian Motor Yamaha Scuter,” no. April, 2019.
[5] F. Majedi and I. Puspitasari, “Optimasi Daya dan Torsi pada Motor 4 Tak dengan Modifikasi Crankshaft dan Porting pada Cylinder Head,” JTT (Jurnal Teknologi Terpadu), vol. 5, no. 1, p. 82, 2017, doi: 10.32487/jtt.v5i1.216.
[6] W. Purwanto, F. Afif, R. Lapisa, D. Yuvenda, M. Y. Setiawan, and H. D. Saputra, “Optimasi Penggunaan Jenis Busi, Oli, Dan Campuran Ethanol Bensin Terhadap Peningkatan Suhu Dan Jarak Tempuh Sepeda Motor 4 Langkah Dengan Metode Taguchi,” AEEJ : Journal of Automotive Engineering and Vocational Education, vol. 3, no. 2, pp. 79–92, 2022, doi: 10.24036/aeej.v3i2.150.
[7] B. U. Wisesa, M. Y. Setiawan, A. Arif, I. Nasution, and A. Aryadi, “The Effect Of Citronella Bio-Additive Mixture On Ron 90 Gasoline On Engine Performance and Motorcycle Fuel Economy Pengaruh Campuran Bioaditif Serai Wangi Pada Bensin RON 90 Terhadap Prestasi Mesin dan Penghematan Bahan Bakar Sepeda Motor,” AEEJ : Journal of Automotive Engineering and Vocational Education, no. 27, pp. 61–70, 2023.
[8] H. Maksum, W. Purwanto, M. Putra, and H. Hasan, “Analysis of the Effect of Using Camshaft Racing on Power and Torque in Motorcycle,” in ACEIVE, 2019, p. 9. doi: 10.4108/eai.16-11-2019.2293107.
[9] T. Hatazawa and T. Kawaguchi, “Frictional torque of needle roller thrust bearings,” Tribology Transactions, vol. 52, no. 1, pp. 127–132, 2009, doi: 10.1080/10402000802561384.
[10] V. Waghole and R. Tiwari, “Optimization of needle roller bearing design using novel hybrid methods,” Mechanism and Machine Theory, vol. 72, pp. 71–85, 2014, doi: 10.1016/j.mechmachtheory.2013.10.001.
[11] A. Suzuki, H. Sugiura, M. Mizuno, M. Inagaki, and T. Kobayashi, “Dynamic Analysis of Needle Roller Bearings on Torque Loss,” Dynamic Analysis of Needle Roller Bearings on Torque Loss, 2013, doi: 10.1299/kikaic.79.1386.
[12] D. Talbot, A. Kahraman, A. W. Stilwell, A. Singh, and I. Napau, “Mechanical power losses of full-complement needle bearings of planetary gear sets: Model and experiments,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230, no. 5, pp. 839–855, 2016, doi: 10.1177/0954406215587539.
Downloads
Published
Conference Proceedings Volume
Section
License
Copyright (c) 2024 H D Saputra, M Y Setiawan, D S Putra, W Purwanto, W Wagino, A Arif, W Afrizal, R Wahyudi (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.